Studio Projects B1 Single Diaphragm Condenser Microphone

B1
Just
LIMITED STOCK - CALL FOR AVAILIBILITY
Studio Projects B1 Microphone
Larger picture
The NEW Studio Projects B1 Microphone will enhance any professional or project studio application at an unbelievable low price.

The Studio Projects B1 condenser microphone is a large diaphragm cardioid microphone in a pressure-gradient transducer employing high quality transformerless design and extremely low noise.

It will enhance any professional or project studio application at an unbelievable low price. As a result of uncompromising dedication and today's advanced production abilities, Studio Projects has broken the barrier of quality vs price for today's recording studio environment.

Being versatile is the key in the recording arena, and the Studio Projects B1 is no exception. Equipped with a true 1" 3 um gold sputtered large diaphragm in a pressure gradient transducer capsule, the B1 will deliver the finest quality of vocal and instrumentation recordings in a wide variety of applications while offering a natural extended transparent high end, yet offer the thick bodied low end expected from a quality microphone.

Applications

• Close miking of instruments with high sound pressure levels
• Announcer’s mic for broadcasting/dubbing
• Home recording and project studios
• Vocalist recording
• Spot mic for: wind instruments, strings, percussion and guitar amps

Features

• Pressure-Gradient Transducer, 1" 3 um mylar capsule
• Selectable filters, 75Hz and 150Hz
• Selectable Pads, -10dB and -20dB

Included Accessories

• Foam wind screen
• Zippered Bag
• Shockmount
B1 Specifications
Type:
 FET 3 micron 1" large single diaphragm
Polar pattern:
 cardioid.
Frequency response:
 20~20000Hz.
Sensitivity:
-34dB,(0dB=1V/Pa)
Output impedance:
 <200 Ohm.
Load impedance:
 >1000 Ohm.
Maximum SPL:
  132db
Noise:
  12dB-A (IEC651)
S/N:
 82 dB.
Power requirement:
 48 +/- 4V.
Current consumption:
  <2.5mA.
Circuit:
  transformerless circuit, featuring extremely low  self noise and large dynamic range.
Connector:
  Gold-plated 3-pin XLR
Pad:
  10dB or 20dB
Low cut :
  6dB/Octave at 150 Hz or 75Hz


Studio Projects B3 Multi-Pattern Large Diaphragm Condenser Microphone

B3
Just
LIMITED STOCK - CALL FOR AVAILIBILITY
Studio Projects B3 Microphone
Larger picture
Redesigned - the NEW Studio Projects B3 Microphone offers incredible preformance at an incredibly low price.

The new Studio Projects B3 is the ultimate in large diaphragm condenser microphones at this price anywhere. This microphone has all the technical refinements to be an enduring classic . With features you would expect in a world class microphone, the B3 offer's three recording pattern positions (cardioid, omni and a true figure eight) with pad and Hi-Pass filter.

Equipped with a true 1" 3 um gold sputtered dual gold large diaphragm in a pressure gradient transducer capsule, the B3 will ensure the finest quality of recordings while offering linear response and a classic deep rich sound. The B3 can be connected to any external microphone preamplifier or mixing console which provides 48 volt phantom power or via any 48 volt external power supply.

The B3 while priced at only £159.00 SRP, will compete favorably with microphones costing substantially more. If your looking for that traditional "German" sounding pedigree for your studio, but simply can't or won't spend the big dollars it takes to get it, then the Studio Projects B3 it the microphone for you. You can buy a pair and still save over £1000!!! Think of what that can buy you!

Applications

• A superb vocal microphone with warm transparent character
• Great for overhead choirs, strings, pianos & percussion
• Great for production, broadcast, and voice over work
• Perfect for the professional and home project studio
• A quality vocal mic suitable for all vocal styles

Features

• Pressure-Gradient Transducer, Dual 1" 3 um mylar capsule
• Selectable patterns (omni, cardioid, figure eight)
• High Pass Filter
• 10db Pad

Included Accessories

• Zippered Bag
• Foam Wind Screen
• Shockmount
B3 Specifications
Type:
1 inch large dual diaphragm 3 micron FET condenser microphone
Polar pattern:
 cardioid/ Omni-directional/figure 8.
Frequency response:
 20~20000Hz.
Sensitivity:
 14/16/18mV/Pa(Omni./Cardioid/Figure 8)(-37/-36/-  35dB @1000Hz)
Output impedance:
 <200 Ohm.
Load impedance:
 >1000 Ohm.
Maximum SPL:
 132/142dB SPL for 1% THD @1000Hz(0dB/-10dB pad, 0dB SPL=0.00002Pa).
Noise Level:
  14dB-A (Cardioid).
S/N:
  80 dB.
Power requirement:
 48 +/- 4V.
Current consumption:
  <2.5mA.
Circuit:
 transformerless circuit, featuring extremely low self noise and large dynamic range.
Connector:
  Gold-plated 3-pin XLR
Pad:
  10dB
Low cut :
  6dB/Octave at 150 Hz.
Size:
  dia: 2.1" length: 8.9"


B3 Reviews

Click here for the Digital Pro Sound review January 2003
Click here for the Home Recording Magazine review February 2003

Studio Projects C1 Condenser Microphone
c1
Larger picture
The Studio Projects C1 is a large diaphragm, fixed-cardioid condenser microphone employing a 1.06” (27mm) capsule, high quality, low noise amplifier and balanced, transformerless output circuitry. It features switchable -10dB or -20dB pad and 6dB@75Hz or 150Hz high pass filter for added control in various recording applications and a clear, full response expected from a large capsule microphone design.

Versatility is key in the recording arena, and the Studio Projects C1 is a well-proven and award winning tool. It is designed to deliver the finest quality vocal and instrumental recordings and will serve to enhance any professional or project studio at an unbelievably low price.

As a result of uncompromising dedication and advanced production capabilities, Studio Projects will continue to broaden the range of quality pro audio microphones & electronics for today's recording environment.

Features

• Pressure-Gradient Transducer: 1.06" (27mm) 6um mylar diaphragm
• High Pass Filter, 6dB/octave@ 75Hz or 150Hz
• -10db, -20dB Pad

Applications

• Close miking of instruments with high sound pressure levels
• Announcer’s mic for broadcasting/dubbing
• Home recording and project studios
• Vocalist recording
• Spot mic for: wind instruments, strings, percussion and guitar amps

Included Accessories

• Shockmount
• Foam wind screen
• Case

C1 Specifications
Type:
Pressure gradient solid state condenser microphone
Polar pattern:
Cardioid.
Frequency response:
30~20000Hz.
Sensitivity:
14mV/Pa=-37dB(0dB=1V/Pa).
Output impedance:
<200 Ohm.
Load impedance:
>1000 Ohm.
Maximum SPL:
 131 dB SPL for 1% THD @1000Hz (0dB SPL=0.00002Pa).
Noise:
 (Line): 27dB (A weighted)---17dB.
S/N:
 77dB.
Power requirement:
48 +/- 4V.
Current consumption:
 <2.5mA.
Circuit:
 JFET impedance converter, discrete balanced output.
Connector:
 Gold-plated 3-pin XLR
Size:
 dia: 2.1" length: 8.9"
Weight:
 26.9oz
Pad:
 -10dB, -20dB
Low cut :
 6dB/Octave at 75Hz or 150 Hz.

C1 Reviews

Click here for the Digital Pro Sound review of the C1.
Click here for Dan Richard's review on VS planet.
Click here to read Rip Rowen's review of the C1.

Studio Projects C3 Condenser Microphone

C3
c3
Larger picture
The Studio Projects C3 is a large diaphragm dual membrane condenser microphone employing a 1.06” (27mm) capsule, high quality, low noise amplifier and balanced, transformerless output circuitry. It features three onboard switchable patterns, a -10dB pad and 6dB/octave@150Hz high pass filter for added control in all manner of recording situation. The C3 has a precise response and a distinct sought-after sonic characteristic commonly associated with large capsule microphone designs.

The beauty of the C3 is in the fact that it is capable of achieving results which are typically entrusted only to microphones boasting very large price tags. The reasons behind this can be attributed to the manufacturing process and the components used to build the mic. It is not “magic”, but rather solid, proven design principles and repeatable build tolerances that are responsible for the performance of the C3. The ratio of quality to price guarantees the C3 to be a benefit to nearly any studio from the modest home setup to the high profile, big-city recording facilities.

As a result of uncompromising dedication and advanced production capabilities, Studio Projects continues to broaden the range of quality pro audio microphones & electronics for today's recording environments.

Features

• Dual membrane 1.06" (27mm) 6 um mylar diaphragms
• Selectable patterns (omni, cardioid, figure eight)
• 6dB/octave@ 75Hz or 150Hz. High Pass Filter
• -10dB or -20dB pad

Applications

• Close miking of instruments with high sound pressure levels
• Announcer’s mic for broadcasting/dubbing
• Home recording and project studios
• Vocalist recording
• Spot mic for: wind instruments, strings, percussion and guitar amps

Included Accessories

• Shock Mount Adapter
• Foam Filter
• Case

C3 Specifications
Type:
1 inch large dual diaphragm FET condenser microphone
Polar pattern:
Cardioid/ Omni-directional/figure 8.
Frequency response:
30~20000Hz.
Sensitivity:
12mV/Pa=-38dB(0dB=1V/Pa).
Output impedance:
<200 Ohm.
Load impedance:
>1000 Ohm.
Maximum SPL:
 132/142/152dB SPL for 1% THD @1000Hz
Noise:
 (Line)---28dB (A weighted)---18dB.
S/N:
 76 dB.
Power requirement:
48 +/- 4V.
Current consumption:
 <2.5mA.
Circuit:
 JFET impedance converter, discrete balanced output
Connector:
 Gold-plated 3-pin XLR
Pad:
 -10dB or -20dB
Low cut :
 6dB/Octave at 75Hz or 150 Hz.
Size:
 dia: 2.1" length: 8.9"
Weight:
 26.9oz

Studio Projects T3 Condenser Microphone

T3
t3
Larger picture
The Studio Projects T3 vacuum tube mic is based on classic 1950’s era designs, combined with present day technological refinements. It is a versatile microphone with abundant applications in the studio from pianos and strings to guitar cabinets and saxophones. Also a serious vocal mic, the T3 will please even the most discerning ears.

The T3 is a variable pattern vacuum tube (valve) condenser microphone. It features our 1.35” (34.5mm.) precision dual membrane capsule coupled through a minimalist tube circuit designed around the 12AY7 (6072) triode and a balanced transformer output. Pattern control is variable between omni directional, wide cardioid, cardioid, supercardioid, hypercardioid and figure of eight via a nine-position switch located on the front of the remote power supply (SPT3). This allows the T3 to be used in all manner of recording situations whether as a room mic, a single point mic for bluegrass or as a spot mic when attenuation from the side and rear is needed. The circuit design of the T3 uses as few components as necessary to prevent added noise and coloration. A hand selected 6072 "dual triode" vacuum tube is used for its low noise, sonic characteristic and reliability. The T3 provides warm transparent sound associated with large capsule tube microphones and it is the absolute stand-alone value in its price class.

As a result of uncompromising dedication and advanced production capabilities, Studio Projects will continue to broaden the range of quality pro audio microphones & electronics for today's recording environment.

Applications

• A superb vocal microphone with warm natural transparent character
• Great for overhead choirs, strings, pianos & percussion
• Useful in production, broadcast, and voice over work
• Perfect for both the professional and home project studio

Features

• Pressure-Gradient Transducer, Dual 1.35” (34.5mm) capsule
• Selectable patterns (omni, wide cardioid, cardioid, hypercardioid and figure of eight)
• Low noise vacuum tube circuitry
• Transformer balanced Output

Included Accessories

• Foam windscreen
• Elastic suspension
• 7pin interface cable
• Variable pattern control power supply
• Aluminum carrying case
T3 Specifications
Type:
Dual diaphragm large capsule vacuum tube condenser.
Polar pattern:
Omni directional, wide cardioid, cardioid, hypercardioid, figure 8
Frequency response:
20~20000Hz.
Sensitivity:
14mV/Pa=-37dB(0dB=1V/Pa).
Output impedance:
<250 Ohm.
Load impedance:
>1000 Ohm.
Maximum SPL:
 125dB SPL for 1% THD @1000Hz (0 dB SPL=0.00002Pa)
Noise:
 (Line)---28dB (A weighted)---18dB-A.
S/N:
 76 dB.
Power requirement:
Supplied Power Supply (SPT3) 110/220
Current:
 200V DC high voltage, <1.5mA - Filament 6.3V DC, <370mA.
Connector:
 Gold-plated 7-pin XLR
Size:
 dia: 2.1" length: 8.9"
Weight:
 26.9oz


T3 Reviews

Click here for a pdf of the new Studio Projects' review of the T3.


SF